Skip to product information
1 of 1

PNW Euro Parts

Top Coated True Nardo grey (CG27-SH) Vinyl Wrap

Top Coated True Nardo grey (CG27-SH) Vinyl Wrap

Regular price $649.00
Regular price Sale price $649.00
Sale Sold out


Don’t let micro scratches and swirl marks threaten to dull your tailored-made vinyl wrap design. Add extra protection with the TeckWrap CG-SH series, and ride with assurance. The car wrap films in this series are equipped with a cutting-edge self-healing coating to maintain the flawless finish of your vehicle, bringing it to the next level of scratch and stain resistance. No more worry about the wear and tear during your daily driving. Order now and let TeckWrap keep your vinyl wrap film impeccable at all times. 


The thickness of the film(um): 110
The thickness of the release liner(um): 142
Type of film: High-grade polymeric calendered film with air release

Adhesive: Henkel solvent-based acrylic adhesive, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dry
Release liner: Plastic liner
Storing period: 2 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sunlight, in a clean and dry place. Important: the top protective layer should be removed before installation, and the film should be stored without the protective layer to prevent "tunneling."
Durability/Warranty: Datasheet (Click the link) 

Release force (N/25mm): Standart: 0.10-0.30, Result:0,18 (23℃,54%H)

Initial Tack(g/25mm): Testing method: GB31125-2014: Standart 800-1500, Result: 1015 (23℃,54%H)

180° Peel strength (N/25mm): Testing Method: GB/T2792-1998: Standart ≥4.9, Result: 8,1 (23℃,54%H)

Adhesion strength: Testing method: GB/T4851-1998, Standart ≥60, Result 70 (No shifting)

    Aging (65℃, seven days): Standart - High-temperature release without adhesive residue, result: no adhesive residue

    Aging (-65℃, ten days): Standart - Low-temperature release without adhesive residue, result: no adhesive residue

    Package:  Roll width 152 cm, length 18 or 23m

    Install tips:

    Application: from +16°С to +18°С, usage from -30°С to +45°С
    Tools: Standard squeegee with a soft buffer
    Conformability: smooth and medium curved surface
    Directional: no
    Overlap width: 3-4mm

    Post heating: 95 Celcius 

    The protective cap should be peeled off before installation.

    Important note: The screen's images, colors, and finishes are approximate. For an accurate representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job, as a slight batch-to-batch variation of color may occur. The film may scratch during the application or a day in and out use. The warranty does not cover the scratching of the film.

    View full details